Avery K Singer – Young Artist With Huge Success

A selection of great artists and records is part of the charm of vinyl recording crafts. Even though, are there any old records that you hate?

Well, you can give them a new life and display them beautifully in your living room.

After adding this stuff, it is easy to paint a vinyl record as to paint something else in your house. Simply put on a smock and plan to paint.

Clean The Vinyl

You can do this either doing manually with a record cleaner kit or using an automatic record cleaning machine. Take one of the vinyl records that you can use to design. Give it a quick wipe to remove soil or loose waste.

Remove all dust and debris with a rag washed in soapy hot water from the documents. Enable the records to dry or scrub them with a clean rag.

You ought to use something to plug the tiny hole in the middle. A strip of tape performs fantastically.

Please ensure you tape that on the back “so that when and when the painting is completed, your painting doesn’t get ruined.

Prepare

Prime the records with plastics spray first. Just add a single thin layer, in compliance with the selected product route. Let the records dry for at least an hour, then add a second coat.

You can use Gesso for this portion while you have it, or other paints you want to paint the record as a base coat. No need to wait until it dries, just paint the top, and plan to apply the end.

Water or oil primers and paints work both well, but latex paints on water seem to be easier to clean and are often cheaper.

Paint The Vinyl Record

You can freely build your art on a prepared context based on your painting experience.

Or you can fold the paper circular into a half 3 times. Your paper can now look like a slice of pizza. Open the paper and you’ll have a 6-piece-length pizza.

Using the marker, draw a design on one piece of your pizza board. Copy the design onto the other pieces with each piece holding up to a window and monitored.

You should use the acrylic for the mixture of old vinyl albums, such as a cup, stirring strap, floetrol, and some cocos milk serium. Note to plug the opening with a tape or something like that in the centre.

Fill each cup with 1 drop of serum and blend properly. Combine all the colors into 1 cup, then spray over the surface of the vinyl and enjoy the effects.

Apply a clear plastic spray film. Add even strokes over the profile surface for a long time. Cause to dry for around an hour and, if required, add a second film.

You should install these colorful art objects as an art deco style on your wall. And, when these colors are being applied, why not apply a final touch to your bowl or bracelet until it cools.

Can you paint and still use the vinyl record?

For coats of acrylic, hand-painted or thin spray paint, there is also a little hope that vinyl records will ever be used for recording.

But if you incorporate acrylic, you can certainly use vinyls only for show or decoration.

Say, is your piano covered in old and worn out? But you still do not want to repaint it as the task requires a really hard-working and dusty process-sanding? Don’t worry! I totally get you. Sanding is truly a pain in the neck. That’s why I’m here to instruct you on how to paint a piano without sanding so you can have the best music experience with the minimum effort. Come on, check it out now!

How To Paint A Piano Without Sanding – Using Deglosser

What Is Deglosser?

I ask the question myself when doing research on this. Basically, Deglosser is a liquid substance that enables us to make the surface less glossy and satin for the color to cling to. Therefore, we don’t need to do any sanding before layering the paint.

How To Use Deglosser

Easy-peasy! Just give your piano a light spray-on and wipe it off with a really nice, clean cloth. Then wait for it to dry, it will remove the shiny finish and your piano is ready for some painting.

Pros and Cons

Pros:

This way by far is the easiest way for you to repaint your piano, no special tools are required and you don’t have to be a Ph.D. in furniture painting to operate the work.

Cons:

Only works with fine, undamaged and no-hole surfaces, you still need to sand on some occasion.

How To Paint A Piano Without Sanding – Using Paint Primer

What is Paint Primer?

Primer works as an extra layer for paint to hold on it and cover for all the flaw details. It works efficiently on almost every surface. In detail, I will inform you of when you need a primer for your piano.

When your musical instrument is porous.

As your piano is sponge-like, the paint will go through holes, into it and leave behind an unalluring surface.

When you want a lighter coat than the color it already has.

Take an example, your piano is now black and you want to repaint it white. It will take you hours to paint tons of white coats until the color comes out as you really want.

Instead, you just use the primer as a first layer so you can reduce the times, effort and money spent on the painting process.

When your piano is stained or glossy

It really helps to hide any blemish and prepare the surface good enough for coloring.

When you overlayer on a red undertone

If your piano is made from wood that contains a high level of tannic acid, you will have to prime it first as it will bleed through the paint.

Some typical are redwood, white and red oak, cherry and walnut.

How To Use Paint Primer

You can never go wrong with paint priming, it’s so easy even for an amateur. Just clean the surface, brush on the prime coat and then wait for it to dry enough for painting. And that’s it! Simple right?

Pros and Cons

Pros:

• It can be used with a spray gun, reducing time and effort.
• It can eliminate the stinky and musty smell.
• Perfect for raw wood.
• Excellent adhesion
• Fast-drying

Cons:

• It can not totally replace sanding.

How to paint A Piano Without Sanding – Using Chalk Paint

What Exactly Is Chalk Paint?

The name already tells you about the aesthetic effect of the product. After putting the paint on a surface, it will have some kind of chalky, woody color. It is perfectly suitable for people who prefer vintage style, giving the piano a unique outlook.

Also, users can paint directly on the glossy and even material surfaces so you don’t have to be worried about sanding.

Step-By-Step Guide:

Step 1: Prepare All The Equipment And Materials Required

• Chalk Paint
• Clear and Dark Wax
• Brushes for painting and waxing
• Towel
• Bucket for mixing( optional)

Note: There are a lot of copycats on the market now so make sure that you buy the authentic products from Annie Sloan’s shops for the ensured high quality.

Step 2: Mix The Colors (Optional)

If you are a creative person who likes to have your own painting color, you will fall in love with this product. It enables you to mix different types together so just let your imagination run wild!

Note: remember to mix the color well to avoid separation during the painting process which can result in an unlikeable piano.

Step 3: Seal, Clean The Piano And Protect The Floor

Let the piano clean and dry before painting. Seal off the fingerboard. Scatter old papers over your working space so you will not accidentally paint the whole floor.

Step 4: Paint The Piano

Now, the real work begins. Put on your first coat and wait for an hour, after then, lay on the second one so the color can come out as beautiful as you wish.

Wait another 1 hour to let it dry and brush on waxes. This will protect the piano from damages and water and give it a shiny look.

Wipe the excess off using a towel. After this, your piano will be ready to use

Note: Dark wax is only used for edges while Clear wax is used for the whole surface.

Pros And Cons

Pros:

• Various colors to choose from
• Color lasts for up to 3 years
• Water-resistant
• A water-based product, don’t cause the unpleasant scent
• No pre-experience needed
• Use well with cloth, brush and spray gun

Cons:

• Drying time depends on the weather
• Can be removed by strong scratches
• Can not entirely replace sanding

Conclusion

However, it’s crucial to remember that we can not skip the sanding process all the time. There will be some circumstances you have to sand your piano like when it is damaged and chipping or has some rough spots.

I’ve just suggested how to paint a piano without sanding. I hope you enjoy the reading and have the excellent music experience brought by a beautiful newly-painted piano when the work is done!

Have you ever thought of protecting acrylic paintings on canvas?

Do you know the right way of it?

Well, protecting acrylic paintings on canvas is a must to help your artwork last longer.

If you intend to protect acrylic paintings on canvas, scroll down to read this article. I’m sure that its useful tips will definitely meet your demand.

Why should we protect acrylic paintings on canvas?

Nowadays, people are likely to use acrylics to paint on almost any surface to make artworks due to its versatility. Acrylics can be used for several styles as well as achieve enormous different effects.

Moreover, they dry quickly and leave a soft exterior. However, it explains why acrylic paintings are prone to collect dust and dirt.

For this reason, some people advise that we should place our artworks behind glass.

Well, as an aesthetic lover, I prefer enjoying the beauty of artwork without glass.

Additionally, an acrylic painting on canvas can alter easily and ruin the visual due to humidity or temperature. What is more, if your painting leaves an uneven finish, which has both glossy and matte parts, it will make the viewers disappointed.

That’s why I think that you should offer protection to acrylic paintings on canvas.

But how?

How to protect acrylic paintings on canvas?

There is a recommendation that we should varnish acrylic paintings on canvas.

Do you know what a varnish?

Well, a varnish is a clear transparent finish, which is seen as a protective layer of the painting. It is a combination of solvents, resin, and oil, which is commonly applied to the paint surface to protect acrylic paintings on canvas.

Also, apart from enhancing longevity, varnishing acrylic paintings will make the finish more glossy.

If you are eager to find out how to varnish acrylic paintings on canvas, keep scrolling down.

Choose the type of varnish

There are two types of varnish, including spray and brush.

It is essential to assess the paint surface and its texture in order to choose the more appropriate type.

For example, for those artworks that are unable to remove and have a smooth finish, you had better brush varnish.

On the other hand, for such high textured or impasto paintings on canvas, spraying varnish is much more convenient and brings higher effectiveness.

Prepare before varnishing

• Remember to apply an isolation coating first.
• Use a lint-free cloth to wipe off the paint surface to make sure the surface is clean and dry enough before varnishing. For acrylic painting, it takes about a day or two to dry.
• Use a clean jar and a flat, large, clean brush in case you will brush varnish. Remember to use distilled water to mix and stir the varnish by a clean stick.
• Prepare some paper towels or garbage bags to protect the surface where you will varnish.
• Place the painting horizontally on a flat and dust-free room.

Apply varnish on acrylic paintings on canvas with a brush

Step 1: Use a clean and large brush for better varnishing. There are some brushes which are made for varnish available on the current market, but it is not necessary. Make sure that your brush is not too stiff if you want a smooth finish.

Step 2: Use a shallow, large dish to pour our the varnish in order to control the amount on your brush well. You should do this process quickly yet gently.

Step 3: Dip the brush into the varnish. You should dip it about 1/4 to 1/3 of the bristles

Let’s apply such long and even strokes from the top to the bottom of your artwork, from left to right. Do not miss any areas so that you will not have to revarnish.

Besides, to avoid leaving visible marks of the brush on your painting, you can overlap each stroke slightly. Especially, multiple thin layers are better.

Step 4: Cover your painting on canvas after having done the varnish with a large board. You had better avoid the amount of dirt or dust that adheres to the wet layer by not touching it or moving it to another place. Let it dry for more than 6 hours or a week for sure.

Spray varnish on acrylic paintings on canvas

Step 1: Follow Step 1 above as the preparation and process are similar.

Step 2: Use your strength to shake the can of varnish to ensure the chemicals inside are mixed well to produce a perfect finish. Repeat this action after every few minutes of spraying.

Step 3: Before spraying your acrylic painting, let’s check out on an old canvas to see if the nozzle still spits well or the flow is right.

Remember to wipe and clean the nozzle of the spray frequently during the process of spraying varnish to avoid being clogged.

Step 4: Keep the spray can away from your acrylic painting on canvas at the right distance according to the recommendation of the manufacturer. It is about 12 inches (30 cm). This distance can prevent the artwork from having spray concentrated in an area.

Step 5: Start spraying from the edge of the canvas to the other side gently. Make sure not to leave visible signs of start and stop lines. It is better to spray more than one layer.

Then, let it dry naturally for a week or more.

Bottom line

It cannot be denied that varnishing is the best way to protect your acrylic paintings on canvas. Apart from its effect on longevity, a varnish can make your artworks shinier and bring a matte, gloss, or satin finish according to your demand. What you need to do is choose the right type of varnish and follow the instructions.

Do you see this article useful enough? If you have something new to share with us, please comment below. Thanks for reading!

Do you know this?

Hanging canvas prints in your house is an eye-catching way to display your favorite photos to other people.

And to hang and protect these canvas prints, we usually frame them. How do we do to frame canvas prints?

Well, you’ll learn how to frame a canvas print in this guide. Let’s get started now!

A Step-by-step Guide on How to Frame a Canvas Print

Buy Frames

Step1: Determine measurements (width, length, and depth) of your canvas print with a tape measure. Then write them down carefully.

• Be careful when you measure because increments on tape measures usually are 1/16.
• To buy the exact frame size, you should check twice for measurements.

Step 2: Select frameworks that suit the canvas prints.

• Shouldn’t choose frameworks that have the same color as your canvas.
• Simple paintings look good when being framed with ornate structures, and planer frames suit for canvas with modern style.

Step 3: Go to a store for the craft to buy the frames you like.

• To avoid making multiple trips to different stores, you should make a call to the store to confirm whether they have the size you want.
• To get the best deal, let’s make a list of prices that are offered by stores.
• You can shop online for frames too.

Step 4: Buy clips for the canvas

• To make the canvas fixed, we usually use 4 clips. Canvas clips requiring screws or not depend on the kind of clips you choose.

Frame the Canvas Print

Step 1: Insert your art into the frame. To do this, let’s upside down the canvas, then put it inside the frame.

• When doing this, you should be careful to not scratch the side which is decorated.
• Let’s rearrange the canvas print if it’s still loose.
• It will be different in each frame, some fit tightly, and some are looser.

Step 2: Attach the canvas clips. In this article, we use clips that need screws. To hold them well, on each stretcher-bar, in the middle, you will position a clip.

• Draw marks where you will place the clip with a pencil.
• At each mark, carefully drill a small hole. Set the canvas clips on those holes, making them fixed by using screws.

Step 3: Turn your canvas print over to check whether it slides out. If it does, you need to press on the clips to make them tight.

Attach a Wire to Hang

Step 1: Put the upside of the canvas down and make sure the right side is up. In order to avoid misunderstanding, you also can use a pencil to mark.

Step 2: Along with a pencil, about ¼ to ⅓ on the way down both sides, you draw a mark with a tape measure. Notice marks on both sides are at the same spot.

Step 3: At the position of two marked points, attach the hanger screws.

Step 4: Then, you cut a wire to hang the canvas. To cut the right length, you should add from 6 to 8 inches to the width of your canvas.

Step 5: Attach the hanger wire.

• Start with the first end, secure it by making a knot.
• Pull the wire to make it tight.
• Do again on the left side.

Attach a Kraft Paper

To protect your canvas, at the back of your canvas print, let’s tape a sheet of kraft paper that is equal or a bit bigger to the framed painting

Do this carefully to ensure that the edges of the paper will line up with the edges of the stretcher-bar.

Trimming the kraft paper with scissors or a knife if it excesses the canvas.

Hang Your Framed Canvas Print

After framing your art, let’s choose suitable places to hang your framed canvas.

Common Questions About Canvas Prints

How Much Does It Cost To Print On Canvas?

The cost of a canvas print depends on the size of the print and can be affected by many factors. Typically, smaller canvas print sizes cost at $20, while larger ones can cost up to $200.

What Is The Good Size For Digital Art?

Well, canvas dimensions will determine the size of your digital art when it’s printed. It would be better if you choose a larger size to preserve more image detail.

For example, you can set the width to 18 inches, the height to 24 inches, and the resolution at 300 pixels-per-inch.

What Is A Gallery Wrapped Canvas?

Briefly, this canvas type is designed to be displayed without a frame. It has thicker stretcher bars, and fasteners are invisible. Plus, the color of the print often extends out to the sides.

Conclusion

Well, I’ve told you information on how to frame a canvas print. I hope that this guide will be helpful to you. Feel free to leave your views in the comment section.

Thank you for reading!

Reference:

• https://www.wikihow.com/Frame-a-Canvas
• https://blackartblog.blackartdepot.com/art-terms/art-glossary-what-is-gallery-wrapped-canvas.html
• https://forum.deviantart.com/art/digital/1545213/

Do you know the right way to hang canvas paintings?

Have you ever tried to do it?

Hanging a canvas painting is not as difficult as you have imagined. You can do it by yourself as long as you have learned the right way and prepared enough tools. No matter what kind of canvas painting do you want to hang, where to hang, the process is simple.

If you are looking for detailed instructions, scroll down to find out the ultimate tips on how to canvas paintings.

Measure the exact height

Step 1: Determine how high the canvas center is.

Lay the canvas painting down on a plane. Then, use a ruler or measuring tape and calculate the height from the top corner to the bottom. To determine the center’s height, let’s divide the measurement in two.

Step 2: Determine how high the canvas painting is from the ground.

Typically, people often add 57 in, which is equivalent to 140 cm, to the height of the canvas. 57 in from the flat surface is at the perfect eye level of ordinary people, which is applied to locate the center of the artworks at museums and art galleries.

Step 3: Mark the canvas painting’s height you are going to hang on the wall.

To determine the right height, use a tape measure on the wall that the canvas painting is hung. It is better to use either a pencil or chalk, which is erased easily. Then, draw a cross or a small dot. The point you have drawn shows how high from the ground that the summit of your canvas painting should be.

Primarily, make sure to press gently if you do not want to destroy the wall.

Use the wire hanging

Step 1: Determine the position of the steel eye screws.

Overturn the canvas painting and lay it down on a plane. Divide the painting’s height into third parts. Then, from the top of the canvas, take a pencil in order to spot a one-third measurement down on each upright stretcher-bar. Make sure to check the measurement carefully on both sides.

Step 2: Twist the steel eye screws into upright stretcher-bars.

After determining the marking you have made, take one steel eye screw and push it into the exact point on the stretcher-bar.

Remember to twist if firmly, and it seems to be straight. Do it repeatedly on another side. If you do not turn these screws in a straight line, it will destroy your canvas painting or the stretcher-bars.

Step 3: Cut and knot the iron wire to the steel eye screws.

Calculate the piece of iron wire, which is about the canvas painting’s width plus 8 in (20 cm), then cut it into the right size. The added length of 8 in allows the wire to make a loop in the steel eye screws without difficulty.

Then, make a loop at each end of the iron wire after threading it through the screws. The shape of the loop should be a “6”. Tighten its knot by pulling the wire gently.

Make sure to keep the wire loose enough between the screws so that the central point is from 2 to 3 in, which is about from 5.1 to 7.6 in, below the summit of the canvas painting.

Step 4: Wrap the iron wire’s ends about the wire and get ready to hang the canvas.

To ensure that the wire ends will not damage your canvas, get them loose beyond the way. Then, weave the end around the wire tightly to make the cord hanging look tidy.

You can use a suspension hook or knock a nail into the wall. Remember the place that the middle of the iron wire to hang your canvas painting firmly.

Reference: https://www.thesprucecrafts.com/hanging-a-painting-wire-d-rings-2578378

Use a sawtooth hanger

Step 1: Determine the center of the canvas.

First, let’s choose a suitable sawtooth hanger according to the canvas painting’s weight. The large canvas needs a large sawtooth hanger indeed.

Then, overturn the canvas painting to measure the top of the stretcher-bar and divide it into two. Mark the middle point by a pencil.

Step 2: Put the sawtooth hanger on the stretcher-bar.

Align the hanger you have chosen over the point you have marked. If your hanger does not have a notch, use a surveying ruler to find out the central point to make two points coincide.

Step 3: Insert nails into both two sides on the hanger.

Keep the hanger fixed to nail the marked spaces on each side of the hanger. This process will keep the hanger attached to the stretcher-bar. Of course, the hanger must be in straight to hang the canvas correctly.

Step 4: Hang your canvas painting.

Similar to using a wire hanging, you can use a suspension hook or a nail to hang the painting. Check it out until it is straight.

Reference: https://www.wikihow.com/Hang-Sawtooth-Picture-Hangers

The Bottom line

You can totally hang a canvas painting by yourself with some simple tools under a detailed guide.

I hope that you can find something useful after reading our guide. If you have further ideas about the way to hang canvas paintings, comment below to share with us!

Thanks for reading!